[Kovove materialy - Metallic materials]
    Wed - October 09, 2024 - 17:47 No. of hits : 1789557 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 61 (2023), Issue 4

The effect of boron nitride (h-BN) and silicon carbide (SiC) on the microstructure and wear behavior of ZA40/SiC/h-BN hybrid composites processed by hot pressing
EMRE DENIZ YALCIN, AYKUT ÇANAKÇI, HAMDULLAH ÇUVALCI, TEMEL VAROL, ABDULLAH HASAN KARABACAK
vol. 61 (2023), no. 4, pp. 257 - 266
DOI: 10.31577/km.2023.4.257

Abstract
Within the scope of this study, silicon carbide (SiC) and hexagonal boron nitride (h-BN) powders were added as reinforcement into zinc-aluminum (ZA40) matrix powders, and the powder metallurgy (PM) method, which is an advanced technique in material production, was used to fabricate ZA40/SiC/h-BN hybrid composites. In the milling process, the as-received powders were mechanically milled at 400 rpm under a protective argon atmosphere for 2 h at room temperature. The hybrid composite powders were consolidated under 700 MPa pressure at 515 °C for 3 h by hot pressing. Weight losses, friction coefficients, and wear rates were calculated by traveling 100 and 200 m at 250 rpm in a ball-on-disc abrasion test setup under 5 and 10 N loads. According to the results, it was seen that SiC and increased h-BN reinforcement changed the mechanical and physical properties of the composites and made significant contributions to the wear resistance and load-carrying capacity.

Key words
ZA40, silicon carbide, boron nitride, wear, hot pressing

[open article.pdf] Full text (2206 KB)

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.8.0      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.


Article abstracts updated: 2024-07-25 13:22      
Articles in press revised: 2024-10-02 12:10     
Full text pdf uploaded: 2024-07-25 13:23    
Information updated: 2023-04-19 16:14   
Code last revised: 2024-03-06 11:13  

© OldSoft, 2004, …, 2024