[Kovove materialy - Metallic materials]
    Sun - December 08, 2024 - 10:39 No. of hits : 1804948 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 61 (2023), Issue 4

A new test for evaluating crack sensitivity of materials during welding
XIANG GAO, WEI LI, YI FAN, JIASHENG ZOU, KENG YAN, JIAQING TANG, KUN LIU
vol. 61 (2023), no. 4, pp. 205 - 221
DOI: 10.31577/km.2023.4.205

Abstract
A new test was developed to evaluate the cracking sensitivity of thick plates based on the strong constraint conditions during the welding process. A typical application of the new test on assessing the cracking sensitivity of Q345R container steel was also investigated. The surface crack rate (δ) and the cross-section crack rate (ζ) both increased when setting the gap narrower. Crack rate and crack length both increased with increasing restraint stress. Under the critical constraint stress, the experimental results show that the welding heat input has no significant effect on crack sensitivity. With increasing carbon equivalent, the crack length and crack rate both increased. The aggregation of S and P was found near the crack, and the oxygen content was high. The fracture showed the characteristics of dendrites and microcrack, which was approved as a solidification crack.

Key words
rib plate restraint crack sensitivity test, numerical simulation, residual stress, critical constraint stress, crack sensitivity, solidification cracking

[open article.pdf] Full text (3775 KB)

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.8.0      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.


Article abstracts updated: 2024-12-03 11:31      
Articles in press revised: 2024-12-05 09:43     
Full text pdf uploaded: 2024-12-03 11:34    
Information updated: 2023-04-19 16:14   
Code last revised: 2024-03-06 11:13  

© OldSoft, 2004, …, 2024