[Kovove materialy - Metallic materials]
    Fri - April 12, 2024 - 23:38 No. of hits : 1740515 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 57 (2019), Issue 5

Microstructural characterization and mechanical properties of diffusion-brazed AZ91C magnesium alloy to 316L stainless steel
ATAEI, M., SHAMSIPUR, A., MIRSALEHI, S. E.
vol. 57 (2019), no. 5, pp. 299 - 306
DOI: 10.4149/km_2019_5_299

Abstract
Dissimilar transient liquid phase (TLP) bonding of AZ91C magnesium alloy to 316L stainless steel was carried out using a pure copper filler metal. The bonding process was conducted in two stages where TLP bonding of 316L to Cu interlayer was first performed and then followed by bonding AZ91C to the other side of the copper interlayer. It was indicated that the temperature rise enhanced the inter-diffusion of elements at the AZ91C/Cu interface and encouraged the formation of hard intermetallic Mg2Cu compound. Refinement of Cu grains was observed and attributed to the induced strain from the fixture. This phenomenon assisted the enhancement of mechanical properties of the joints. By increasing the temperature from 495 to 530 °C, the shear strength revealed an upsurge of more than 20 %. The presence of Mg2Cu was detected as the main contributor to the increased shear strength and microhardness at elevated temperatures.

Key words
diffusion brazing, AZ91C/316L joints, mechanical characteristics, elevated temperatures, microhardness, shear strength

[open article.pdf] Full text (1308 KB)

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.8.0      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.


Article abstracts updated: 2023-10-26 07:45      
Articles in press revised: 2024-04-11 09:16     
Full text pdf uploaded: 2023-11-08 06:53    
Information updated: 2023-04-19 16:14   
Code last revised: 2024-03-06 11:13  

© OldSoft, 2004, …, 2024