[Kovove materialy - Metallic materials]
    Mon - April 22, 2024 - 05:35 No. of hits : 1743021 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 56 (2018), Issue 3

In-situ compaction and sintering of Al2O3-B4C composites by using a High-Frequency Induction System
vol. 56 (2018), no. 3, pp. 177 - 181
DOI: 10.4149/km_2018_3_177

Alumina powders containing varying ratios of B4C were mixed in a V-type mixer for 30 min with 35 cycle/min to obtain a homogeneous mixture. Six different chemical compositions were prepared and sintered at 1600 °C for 20 min using an Ultra-High-Frequency Induction Heated System. The samples were cooled by air. The density, surface roughness, hardness and microstructure of samples were investigated. The results showed that when the amount of B4C increased, the values of hardness increased and the values of surface roughness decreased.

Key words
alumina, boron carbide, sintering, induction, composite

[open article.pdf] Full text (382 KB)

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.8.0      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.

Article abstracts updated: 2023-10-26 07:45      
Articles in press revised: 2024-04-11 09:16     
Full text pdf uploaded: 2023-11-08 06:53    
Information updated: 2023-04-19 16:14   
Code last revised: 2024-03-06 11:13  

© OldSoft, 2004, …, 2024