[Kovove materialy - Metallic materials]
    Mon - December 09, 2024 - 06:24 No. of hits : 1805133 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 54 (2016), Issue 1

The effects of Co addition on the mechanical and microstructural properties of the matrix material of a Fe-based marble cutting tool
BUDAK, S., KAPLAN, M.
vol. 54 (2016), no. 1, pp. 77 - 82
DOI: 10.4149/km_2016_1_77

Abstract
In this study, four different kinds of marble cutting matrices with a base composition of Fe-Cu-Sn and with variable amounts of Co powder were produced. For compaction, hot sintering process was carried out at 850 °C under 35 MPa for 4 min. The mechanical and microstructural properties of the matrix materials were determined using SEM with EDS, three-point bending test, density and hardness measurement techniques. The addition of Co powders to the matrix and the subsequent hot sintering process affected the mechanical and microstructural properties of the cutting tool, such as hardness, total elongation, % porosity and phase distribution.

Key words
marble cutting tools, cutting matrix material, hot sintering process, mechanical and microstructural properties

[open article.pdf] Full text (492 KB)

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.8.0      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.


Article abstracts updated: 2024-12-03 11:31      
Articles in press revised: 2024-12-05 09:43     
Full text pdf uploaded: 2024-12-03 11:34    
Information updated: 2023-04-19 16:14   
Code last revised: 2024-03-06 11:13  

© OldSoft, 2004, …, 2024