[Kovove materialy - Metallic materials]
    Fri - April 12, 2024 - 22:42 No. of hits : 1740511 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 39 (2001), Issue 6

Creep characteristics of MoSi2 based composite materials (in Slovak)
vol. 39 (2001), no. 6, pp. 379 - 387

Creep resistance and microstructure changes of two MoSi2 based materials were studied. The first one was MoSi2 with 15 vol.% of SiC and the second one MoSi2 with 15 vol.% of HfO2 particles. Creep tests were realized in 4-point bending mode in ambient air at temperatures 1100-1400 °C under a stress of 100 MPa. The microstructure and its response to high temperature load were investigated by TEM using thin foil technique. Comparison of the creep resistance of both materials at each particular testing temperature shows that the performance of MoSi2-15%HfO2 was about one order of magnitude better than that of MoSi2-15%SiC.

Key words
molybdenum disilicide, MoSi2-SiC and MoSi2-HfO2, creep behaviour, powder metallurgy, diffusion

Full text not available

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.8.0      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.

Article abstracts updated: 2023-10-26 07:45      
Articles in press revised: 2024-04-11 09:16     
Full text pdf uploaded: 2023-11-08 06:53    
Information updated: 2023-04-19 16:14   
Code last revised: 2024-03-06 11:13  

© OldSoft, 2004, …, 2024