[Kovove materialy - Metallic materials]
    Sat - June 23, 2018 - 18:04 No. of hits : 937923 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 56 (2018), Issue 3

Effect of Sn addition on the microstructural characteristics and mechanical properties of the titanium alloy (Ti6Al4V)
vol. 56 (2018), no. 3,

Ti-6Al-4V-xSn (x = 2, 4, and 6 wt.%) alloys were developed for the aerospace application through the near net shaped technique powder metallurgy route. Spark Plasma Sintering (SPS) was used to sinter the samples. The influence of Sn particles on the microstructural characteristics and mechanical properties of titanium alloy was examined through a novel technique called SPS. It has been found that Sn has a strong solid solution strengthening ability in the titanium alloy (Ti6Al4V). Moreover, the addition influences the microstructure and mechanical properties of titanium alloy. With increasing the percentage of Sn content, the density of the samples decreases, and the mechanical properties like yield stress (YS), ultimate tensile stress (UTS), the percentage of elongation and the hardness are greatly varying. From this investigation, it is found that YS, UTS, the percentage of elongation of the samples of Ti6Al4V-2Sn alloy exhibit better values than of Ti6Al4V-4Sn and Ti6Al4V-6Sn alloys, and the hardness of the samples is increasing with the addition of Sn from 2 to 6 %.

Key words
Ti-6Al-4V-xSn (x = 2, 4, and 6 wt.%), Spark Plasma Sintering (SPS), microstructure, mechanical properties

Full text not available

[IMMS SAS]      UMMS SAV - Bratislava (SK)   ver. 1.6.9   (oš)        [go to HOME PAGE]

Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.

Article abstracts updated: 2018-06-14 09:46      
Articles in press revised: 2017-11-14 12:19     
Full text pdf uploaded: 2018-05-11 11:59    
Information updated: 2017-12-23 08:33   
Code last revised: 2017-12-22 14:57  

© OldSoft, 2004, …, 2018