[Kovove materialy - Metallic materials]
    Fri - March 29, 2024 - 01:18 No. of hits : 1736529 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 46 (2008), Issue 2

Surface modification of 316L stainless steel with plasma nitriding
YETIM, A. F., YILDIZ, F., ALSARAN, A., CELIK, A.
vol. 46 (2008), no. 2, pp. 105 - 116

Abstract
Plasma nitriding treatment of 316L austenitic stainless steel has been performed in 80%H2-20%N2 gas mixture, for various treatment times (1, 4 and 8 h) and at relatively low temperatures (400, 450 and 500 °C). Mechanical and tribological properties of the plasma nitrided 316L stainless steel were examined using X-ray diffraction, microhardness tester, scanning electron microscopy and pin-on-disc tribotester. The results show that the modified surface specimens of nitrided 316L stainless steel at 400 °C consist mainly of s-phase and small chromium nitride precipitates. At higher temperatures both CrN and iron (γ’-Fe4N) nitrides have been observed and their amount increases with increasing treatment temperature. The highest hardness values were attained at 500 °C and 8 h, an increase of surface hardness was observed with increasing process time. Also wear resistance was improved after nitriding. The wear rate decreased with increasing process time and temperature. After electrochemical measurement it is observed that the corrosion resistance of nitrided 316L steel is getting worse in the modified layer unless the layer consists completely of s-phase and has an adequate continuous layer which covers whole surface of the specimen.

Key words
plasma nitriding, 316L steel, s-phase, wear, electrochemical measurements

[open article.pdf] Full text (546 KB)

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.8.0      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.


Article abstracts updated: 2023-10-26 07:45      
Articles in press revised: 2024-03-26 11:42     
Full text pdf uploaded: 2023-11-08 06:53    
Information updated: 2023-04-19 16:14   
Code last revised: 2024-03-06 11:13  

© OldSoft, 2004, …, 2024