[Kovove materialy - Metallic materials]
    Fri - March 29, 2024 - 14:35 No. of hits : 1736713 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 44 (2006), Issue 2

The efffect of post-weld heat treatment on properties of low-alloyed CrMoNb steel after submerged welding
GOJIC, M., MIOC, B., KOSEC, L.
vol. 44 (2006), no. 2, pp. 119 - 126

Abstract
The effect of post-weld heat treatment on mechanical properties, microstructure and fracture mode of low-alloyed CrMoNb steel was examined using an optical microscope, and a scanning and transmission electron microscopes. Steel plates, 18 mm thick, were welded by means of the submerged arc welding technique and then heat treated in the temperature range from 475 to 700 °C. It was found that the tensile strength, hardness and impact energy values decrease with the increasing annealing temperature, except for annealing at 550°C and 625°C. Anomalies were attributed to the precipitation of fine carbides. Complex cementite proved to be beneficial in controlling the fracture mechanism in impact (Charpy V-notch) and tensile tested specimens.

Key words
low-alloyed steel, welding, mechanical properties, microstructure, fracture surface

[open article.pdf] Full text (1017 KB)

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.8.0      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.


Article abstracts updated: 2023-10-26 07:45      
Articles in press revised: 2024-03-26 11:42     
Full text pdf uploaded: 2023-11-08 06:53    
Information updated: 2023-04-19 16:14   
Code last revised: 2024-03-06 11:13  

© OldSoft, 2004, …, 2024